Full article with thanks to: gopetfriendly.com/blog/how-to-check-your-dogs-pulse-respiration-and-temperature
You can tell your pet isn’t feeling well, but you don’t know how to help. It’s a rotten feeling! Checking some basic wellness measurements can help you figure out what’s causing your pet’s discomfort and get him feeling better.
Every pet owner knows that feeling … when your pup isn’t himself, but you’re not sure if he’s seriously sick. Simply learning to check your dog’s pulse, respiration, and temperature can help you assess his degree of pain, injury, or illness. And that can help you decide on a proper course of action to get him feeling better.
Taking and recording these measurements when your dog is healthy gives you a baseline to know when something isn’t quite right. The difference between your dog’s normal readings and what he’s experiencing when he’s unwell might lead you to seek professional medical help.
Checking Your Dog’s Vital Signs
The basic vital signs to check are your dog’s pulse, respiration, temperature, and capillary refill time. We’ll explain what they are and how you measure each one.
Respiration
To determine your dog’s respiratory rate, you’re simply counting the number of breaths your dog takes in a minute. To determine your dog’s respiratory rate, follow these steps:
- Observe or place your hand over your dog’s chest to count the number of times the chest rises (inhales) and falls (exhales). Each rise/fall combination counts as one breath.
- Count the breaths for 30 seconds and multiply by two to get the respiratory rate in breaths per minute.
A normal respiratory rate for small dogs is between 20 and 40 breaths per minute. Larger dogs will have a slower respiratory rate, usually between 10 to 30 breaths per minute.
Dogs in distress could breathe faster or slower than their normal rate. For example, dogs in pain or with a fever might pant (breath faster than normal). And a dog whose respiratory rate has decreased significantly could be in shock.
Temperature
Your dog’s body heat cannot be accurately gauged by feeling your dog’s nose or belly. To get a good measurement, you’ll need a digital thermometer. One made for humans is fine, just be sure you keep your dog’s thermometer in a separate place from others in your home. You wouldn’t want to grab the wrong one in a feverish haze!
To check your dog’s temperature, follow these steps:
- After lubricating the tip of a digital thermometer with petroleum or water-soluble jelly, move your dog’s tail up and to the side to prevent him from sitting.
- Insert a thermometer ½”-1” into the dog’s rectum and wait for the thermometer to beep, according to instructions.
Your dog’s temperature should be between 100.4° F and 102.5° F (38° C-39.16° C). But, just like humans, dogs’ normal temperatures can vary, and even be different at different times of the day! So it’s important to know your dog’s healthy temperature for comparison.
Fluctuations in your dog’s temperature (either up or down) can be serious. If your dog is experiencing either a higher than normal or lower than normal temperature, it’s best to phone your veterinarian to discuss the appropriate treatment.
Pulse
Your dog’s pulse is the rhythmic movement of blood through his arteries. As his heartbeats, the blood flows (pulses) through the vessels. You can measure your dog’s pulse by following these steps:
- Place the ball of two fingers (not your thumb) on the depression found in your dog’s inner upper thigh, over the Femoral artery. It might take a little searching around to find it the first time – don’t give up!
- For smaller pets, placing your hand over the left side of the dog’s chest just behind the elbow might also allow you to feel the heartbeat.
- Count the beats for 30 seconds and multiply by two to get the pulse rate in beats per minute.
The normal pulse rate for small dogs will range between 90 and 160 beats per minute. Larger dogs will have a lower normal pulse rate, usually between 65 and 90 beats per minute.
Hydration
We all know that dehydration is a serious condition that affects pets as well as humans. Here we’re measuring the moisture in your pet’s body, which should be about 70% of his body weight. Follow these steps to determine if your pet could be dehydrated:
- Carefully lift your dog’s lip/flews at the side of his mouth. (Lifting from the front of the mouth is uncomfortable for many breeds).
- If the gums are sloppy wet, he is well hydrated. But if his gums are dry or sticky he may be slightly dehydrated. Encourage him to drink.
- If your dog’s gums are dry or sticky, his eyes are sunken, his skin remains at a peak when gently grabbed at the shoulders, or he’s lethargic, your pet could be severely dehydrated and in need of immediate veterinary care.
Capillary Refill Time (CRT)
To check your dog’s circulation, you’ll need to determine his capillary refill time. This is measured by following these steps:
- Again, carefully lift your dog’s lip. Then press gently on the top gum above the teeth with the ball of your finger until the gum turns white.
- When you release the pressure, the colour should return to the gums in 1-2 seconds. Capillary refill time indicates whether your dog’s circulation is sufficient to send blood to his extremities.
If it takes longer than 2 seconds for colour to return to your dog’s gums, your pet needs immediate veterinary care. As you drive him to the vet, cover him with a light blanket to preserve body heat. If he’s not bleeding from an injury, you can also slightly elevate his hindquarters to promote circulation to his vital organs.
Gum colour is also a good indicator of overall health. Gums that are pink indicate a normal, healthy pet (unless the gums normally have a dark pigment). Pale or white gums could indicate anaemia, blood loss, or poor circulation. Blue or grey gums could indicate a lack of oxygen. And yellow gums could indicate liver disease or zinc toxicity. In any of these last three cases, your pet needs immediate veterinary care.
Weight
Your pet’s body weight is another important factor in determining his health. Specifically, be on the lookout for sudden increases or decreases in your pet’s weight.
- For large dogs, bodyweight is best measured on the scale at your veterinarian’s office.
- Small dogs can be weighed on your bathroom scale. Hold your dog and note your combined weight. Then immediately set your dog down and weigh yourself. The difference between the two is your dog’s weight.
Knowing your dog’s precise weight is imperative before administering treatment or medication. The smaller the pet, the more critical it becomes. Even being off by a pound could result in an overdose.
Unfortunately, so many pets are overweight that it can be difficult to recognize a dog’s healthy body shape. It might be easier for you to judge by feel.
If your dog is at a healthy weight, you should be able to feel his ribs but not see them. (Of course, super-lean breeds like Greyhounds and Ridgebacks are an exception.) When viewed from the side, your dog’s belly should tuck up higher than his chest. And, looking down at your dog’s back, you should see a slight waistline. If you think your pet may be overweight, speak with your veterinarian about a healthy way to help him drop some pounds.
Knowing what is normal for your pet will help you determine when something isn’t right. So practice checking your dog’s pulse, respiration, and temperature and keep track of the results. Then, whether it’s an allergic reaction, injury, or illness, you’ll be prepared to assess your dog’s condition and help him recover.
Full article with thanks to: gopetfriendly.com/blog/how-to-check-your-dogs-pulse-respiration-and-temperature
We offer free advice on pet travel within or outside the UK, so whether you’re looking for worldwide pet travel services or European travel – we give you our honest, expert advice.
If you choose us for pet travel, don’t worry – your animal companion will be in safe hands from start to finish.
Simply get a quote from us for more information.